PDA

View Full Version : Left over bits


GMC
December 14th, 2003, 11:03 AM
Fiat X1/9 radiator reconditioned and modifed top hose to suit Hawk 80.00 Euro
Hawk floor mounted accelerator pedal kit (new) 10.00 Euro
Hawk 2000 gear linkage kit with three rose joints not complete but new 10.00 Euro
Hawk 2000 hyd. clutch kit (new) 10.00 Euro
Hawk rear suspension tie bars, rose joint one end and rubber mount other end (new) 10.00 each.
Steering column X19 (I think) with keys would exchange for one without keys !! just pay all postage costs.
Beta front suspension struts (rear Hawk) New including springs 120.00 pair
Group 4 alloy dash front panel (was fitted marked) 2.00 Euro
Various alloy water pipes - Hawk (all new) 5.00 Euro
Hawk 2000 engine mount support (new) 1.00 Euro
Hawk fibre glass centre consul (new) 25.00 Euro
Hawk rear glass window (new) 10.00 Euro
CAE right side petrol tank. 15.00 Euro
Hawk alloy petrol tanks less caps any one interested ?

Plus Compomotive 7/8" x15" rims 4 stud. (CAE) 2 litre Lancia engine / gearbox with side draughts, remote servo and Fiat 132 calipers and rear calipers with mechanical hand brake all as previously advertised.

E-mail or phone 00353 66 7137036
Gerard Mc Carthy

lyndon
December 14th, 2003, 11:44 AM
Hi Gerry,
I would be very interested in purchasing the petrol tanks, please let me know how much you want for them.
Lyndon.

Ducatidave
December 15th, 2003, 08:26 AM
Hi, Gerard, I would like the Floor mounted accelerator. I may be interested in other bits (Radiator) as well.
I am sticking with the Beta 2Litre engine.
David

GMC
December 16th, 2003, 09:05 AM
Hawk alloy petrol tanks sold to Lyndon

David you can have as much as you want the more the better !
E-mial me your number and I will phone you in the evening
Gerard.

Ducatidave
December 16th, 2003, 09:13 AM
Home phone number is 01332 700279, e mail is david.j.clarke@pgen.com

shaun
December 17th, 2003, 09:36 AM
I am interested in the struts for my beta, what make are they, condition, p/n stamped on casing, inserts or fixed etc. Where are you in Ireland, I could possibly fly over from stansted or are you prepared to arrange carriage?

Thanks

mogul_x
December 17th, 2003, 09:58 AM
Originally posted by GMC
Steering column X19 (I think) with keys would exchange for one without keys !! just pay all postage costs.

Gerard,

Might be interested in this, assuming it is from an early X1/9. I think the difference between early and late is the position of the ignition cylinder. Early cars are slightly above three o'clock as viewed from the driver's seat, late cars have the lock slightly below three o'clock.

Any particular reason you're looking for one less keys?

GMC
December 17th, 2003, 12:00 PM
Radiator, engine mount, rear calipers and floor mounted accelerator pedal sold.

Shaun,
Strut condition:brand new never used, number on casing 1453 8K Overall lenght 21 1/4 " from top of nut to bottom of shock, I think these are the correct short ones. They are fixed, not inserts , plus the new spring (unused). I live near Tralee, 10 miles from Kerry Airport, but carriage for 15kg to UK is 23 Euro

Mogul-x
I did not know there was a difference, mine is just below 3 o clock.
Reason; My car is a push buttom start and I do not want a steering lock fitted. I was just going to cut it up !

Stratos
December 21st, 2003, 09:57 AM
Originally posted by GMC
Compomotive 7/8" x15" rims 4 stud. (CAE)
Gerard Mc Carthy

Gerard,

I presume for Corse S.

Can you advise me what model of Compomotive they are, and the price, please?

shaun
December 28th, 2003, 09:04 AM
Do you have any idea of the strut manufacturer and did they come off a replica?

GMC
December 31st, 2003, 01:02 PM
David,
I will fax you a drawing with the measurements of the rims so you can check the offsets yourself.

Shaun,
Strut make Sachs and yes they came with the Hawk kit when I bought it.

Happy new year to all.
Gerard Mc Carthy.