PDA

View Full Version : Carello Spots

igosling
January 13th, 2008, 12:34 PM
All,

Does anyone know the dimensions of a Carello Spot Lamp?

Trying to assess what combination of indicator, side light and spot to put together

Thanks

Iain
Matt No VAT
January 14th, 2008, 03:25 AM
Iain,

I'll get them for you tonight check on here at about 7pm
Sptwoman
January 14th, 2008, 06:50 AM
The Carello fogs are 165mm X 100mm. I've matched them with a pair of Mini Metro units off ebay.
Matt No VAT
January 14th, 2008, 09:57 AM
Yup, My Carello's are more or less the same:

Width 165 mm
Height 95 mm
Depth 65 mm

Measurements are taken from outer edges of the chrome surrounds and do not include the size of the plastic lens covers, but they only add about 5mm to width and height
BAS
January 14th, 2008, 10:42 AM
I fitted Cibie Airports with the metro side & indicator. I bit tight with the covers on but they do go.
igosling
January 14th, 2008, 01:40 PM
Matt, Brent, Allen,

Thanks for the feedback.

Iain
Sando
January 15th, 2008, 12:11 PM
Brent you may need to think about the SVA test angles for the metro side lights and indicators. They may need to be mounted a little further forward and at an angle to be seen from the SVA side angle. Easy to do and easy to change again later. ;) I think I just screwed mine under the top lip of the opening so no marks showing afterwards..
Chris J
January 15th, 2008, 03:44 PM
Brent you may need to think about the SVA test angles for the metro side lights and indicators. They may need to be mounted a little further forward and at an angle to be seen from the SVA side angle. Easy to do and easy to change again later. ;) I think I just screwed mine under the top lip of the opening so no marks showing afterwards..

This is how my car was (see photo):
BAS
January 16th, 2008, 01:34 PM
Brent you may need to think about the SVA test angles for the metro side lights and indicators. They may need to be mounted a little further forward and at an angle to be seen from the SVA side angle. Easy to do and easy to change again later. ;) I think I just screwed mine under the top lip of the opening so no marks showing afterwards..

Thanks Rob, I'm mounting everything as I want it to end up & then change them to suit the SVA. :D ;)


Chris, nice wheels by the way. :D