View Full Version : Wanted - 8 valve Thema/Integrale head
Martin K
October 30th, 2007, 04:00 AM
I am seeking an 8 valve turbo head in any condition.
We need it to explore what machining the ports will tolerate and the head will become scrap as a result.
So a head from an engine that has suffered a blow up of cam belt failure will be fine for this purpose.
I don't want to have to pay for and destroy a good head if possible!
Thanks
Martin
chris.richard
October 30th, 2007, 04:05 AM
Lancisti.net?
strat6v
October 30th, 2007, 04:11 AM
To think i chucked a complete croma turbo engine and an 8v thema head a few years back. Sorry Martin :o
Martin K
October 30th, 2007, 07:32 AM
To think i chucked a complete croma turbo engine and an 8v thema head a few years back. Sorry Martin :o
Arrrrrrrrgh!
Such is life!
CorseChris
October 31st, 2007, 04:09 AM
Ditto with an 8V Thema motor in good order just a few months back.
Martin K
November 12th, 2007, 02:52 AM
Bumping this request to the top
Chris J
November 12th, 2007, 07:29 AM
Have you tried Walkers Martin?
'Might be worth a go?
syndicate
November 13th, 2007, 04:01 PM
I seem to remember from my integrale days the early 8v head integrale is identical inc valves to 1.6 hf turbo (cams are different)the later 8v kat is different but very like dedra turbo check out first though im going a bit deranged with all the filler dust (audi s1 pikes peak almost complete)
STR470S
November 14th, 2007, 06:45 AM
Martin,
Not sure if it is still for sale 8v Integrale head (http://www.guy-croft.com/viewtopic.php?t=1062) but worth a punt.
Cheers,
Chris
Martin K
November 14th, 2007, 07:31 AM
Thanks everyone. Keep them coming!
syndicate
November 14th, 2007, 04:25 PM
i have a 1993 dedra turbo kat engine 63k miles engine ran sweet and fast 6 months ago i bought the dedra (with no turbo or management sensors dizzy etc) my lunatic friend put all turbo and management on an injection zetec dah The Dedra was a local car which i knew well with good engine and box i bought it for the box only I dropped engine and box out and has been dry stored since ive known the car since 1996 must still be on standard bearings if you can find use £150 complete you could strip to inspect cond here prior to payment or send a courier and balance me after yourve pulled it apart
STR470S
November 29th, 2007, 06:22 AM
Martin,
Another one on ebay (http://cgi.ebay.co.uk/Lancia-Delta-Integrale-8V-CYLINDER-HEAD-Complete_W0QQitemZ300174521994QQihZ020QQcategoryZ3 1352QQssPageNameZWDVWQQrdZ1QQcmdZViewItem)
Cheers,
Chris
Martin K
November 30th, 2007, 11:37 AM
Martin,
Another one on ebay (http://cgi.ebay.co.uk/Lancia-Delta-Integrale-8V-CYLINDER-HEAD-Complete_W0QQitemZ300174521994QQihZ020QQcategoryZ3 1352QQssPageNameZWDVWQQrdZ1QQcmdZViewItem)
Cheers,
Chris
Thanks, Chris.
I and Bidnapper are keeping an eye on that one!
vBulletin® v3.7.0, Copyright ©2000-2008, Jelsoft Enterprises Ltd.