guy mayers
April 28th, 2003, 11:12 AM
Help! Gerry forwarded this email on to me but I can't find any email addresses of our club members down under! Can anyone give Peter any advice (other than buy now, worry later!)
Thanks
Guy
> Does anyone know about Australian regs ?????????? Best regards Gerry
> ----- Original Message -----
> From: Fitzgerald Family
> To: enquiries@hawkcars.co.uk
> Cc: peter.fitzgerald@zektin.com.au
> Sent: Friday, April 25, 2003 11:52 AM
> Subject: Information on Australian Registration of HF3000
>
>
> I have read a number of articles on your Stratos Replica and would like
any
information you can provide on potential registrtion difficulties in
Australia. I live in Melbourne, so the vehicle would have to be
registerable
in Victoria, which I believe is one of the worst states here to obtain
approvals for limited production vehicles.
>
> I have access to a good workshop and some of the best Alfa Romeo tuners in
the country, so construction of the vehicle and provision of engineer's
certification should not be a problem. But this would naturally be more
simple if manufacturer's design calcs are available.
>
> Any information you can provide would help me to assess the difficulties
involved in this project. I will also discuss the details with my local
engineers and may come back to you with additional queries.
>
> Please send any response to my business email address (as per CC above) as
I
monitor it daily.
>
> Regards
>
> Peter Fitzgerald
Thanks
Guy
> Does anyone know about Australian regs ?????????? Best regards Gerry
> ----- Original Message -----
> From: Fitzgerald Family
> To: enquiries@hawkcars.co.uk
> Cc: peter.fitzgerald@zektin.com.au
> Sent: Friday, April 25, 2003 11:52 AM
> Subject: Information on Australian Registration of HF3000
>
>
> I have read a number of articles on your Stratos Replica and would like
any
information you can provide on potential registrtion difficulties in
Australia. I live in Melbourne, so the vehicle would have to be
registerable
in Victoria, which I believe is one of the worst states here to obtain
approvals for limited production vehicles.
>
> I have access to a good workshop and some of the best Alfa Romeo tuners in
the country, so construction of the vehicle and provision of engineer's
certification should not be a problem. But this would naturally be more
simple if manufacturer's design calcs are available.
>
> Any information you can provide would help me to assess the difficulties
involved in this project. I will also discuss the details with my local
engineers and may come back to you with additional queries.
>
> Please send any response to my business email address (as per CC above) as
I
monitor it daily.
>
> Regards
>
> Peter Fitzgerald