Bits I'm taking to Stoneleigh

[Sando]

All bits to fit Hawk

Thema Turbo vented discs 4 stud (with shim spacers) and calipers. Ready to go - Looking for about £50. ex mark Clowling.

Second pair of used Thema Turbo Calipers, could again be used as is, or reconditioned if wanted. No pads - offers or free as spares with above.


V good. Brembo Solid 132 discs, 4 stud, + Ford XR3 front Calipers with as new green stuff pads. ready to go straight on to your 6mm mounting plate. Again £50 would get them.



New Facet Solid State fuel pump 'fast road' £20 (Ideal as a lifter pump for injection or with a regulator for Carbs.

Puralator adjustable fuel regulator (for Carbs) Chrome finish, used but as new £10. - Brent has first dabs on this :)

Hawk outer rear wishbone bolts and nuts 4" UNF. Hard to get hold of and easily get siezed. I had to buy a box of each to get some, so I'll sell them at much less than the individual price to recup some of my spend.
£5 a set of 4. x10 sets for sale.

V6 24v coil packs x2 £15 each

Plus anything else I can find/ fit in! ;)


CLUB BITS
Don't forget there will also be Club Mugs and Coasters on sale along with Wheel centres and Campagnolo sticker sets and the last few (3) remaining collectors item 2007 Calendars :)

Cheers
Rob

[Matt No VAT]

Rob,

Wheel centres and Campagnolo sticker sets ??????

When I get back from holiday I will be purchasing a set of Gerry's Campagnolos so I will need a set of centres and stickers - so please set some aside for me. (I assume the (3) is the number of sets of 4 you have??)

Pls PM me with confirmation and costs.

I cant make it to Stoneleigh as I'm away on hols for a week - so will have to sort out via post etc

Thanks in advance,

[BAS]

Rob

Thema Turbo vented discs 4 stud (with shim spacers) and calipers. Ready to go - Looking for about £50. ex mark Clowling.

I'll take these so long as they'll fit under my compomotives without changing the offset.

Thanks for thinking of me for the fuel regulator but I now have a new one.

cheers
Brent.

[mudhut]

24V coil packs, wheel centres (4), Campag stickers (4) for me please Rob.

[Sando]

Matt you have a PM. Loads available don't worry.

Brent. No probs I'm sure they will fit, been used by many others too. You can take them to try if you want. Cash up front or post up to me later I don't mind. I trust you, not sure about all the others though :eek:

Peter No probs, Coil packs are yours. And as above we have loads of the wheel centres and stickers but no circlips...see earlier post :)

[Sando]

Oh Just thought.
I have some Hawk - Beta Stainless Exhaust manifold downpipes that were cut off just before the swivel joints too. anyone making up ther own system for a Beta engined Hawk this would start you off.

Free to a good home. :)

Rob

[Shaun II]

I would like the fuel pump and regulator - If I can pick them up on May the 13th. Possibly interested in the remains of the manifold for my beta but will have to look at a photo to try and remember what they were like.

[Sando]

Bonjour Shaunie

Have to see whats left after Sunday I'm afraid. I've had some other interest via email, so I've just said they'll be first come first served on the day.
I'll let you know if there is anything left!

Soz
Rob

[Shaun II]

OK, merci.

[strat6v]

I'm bringing an x1/9 stainless header tank
pair of 850 spider inner door handles and spoons
spare spoons
column stalks
pair of vitaloni california mirrors
beta strut top mounts
24v ecu
12v flow meter
24v flow meter
12v flow meter fitting(for filter)
90 deg samco elbow to fit 12v flow meter
new pipercross foam filter for 12v
3/3 inch 4 point willans harness in very good condition( black )
124 clock
hella front fog lights
12v plug leads
wilwood dynalite front caliper mounts
re-cored, unused x19 rad with outlet turned.

[Matt No VAT]

John,

Do you still have the stainless header tank still? If so pls PM me

Ta,

[Patriq Backlund]

Hi !

I'm interrested in:
Radiator, Handles and spoons, column stalks, mirrors, topmounts for struts

It they are available, please let me know.

Regards,
/Patriq