Steering Wheel Hub

[guy mayers]

This one will fit Gerrys new Stradale steering wheel (with some careful filing of the wheel) but not a wheel with the Momo bolt pattern. It's an early one so no collapsible section. Expensive, but only the second one I've seen recently!

Nardi Hub (http://cgi.ebay.com/ebaymotors/Nardi-steering-wheel-adapter-for-Fiat-850-Spyder-124_W0QQitemZ190045187559QQihZ009QQcategoryZ33704Q QrdZ1QQcmdZViewItem)

Guy

[Chris J]

Guy

Why do Gerry's wheels fit a rare hub rather than a more common one?

[guy mayers]

Because that's the pattern lancia used on the original! :D

[mogul_x]

I don't think it is the same pattern. I've got a real Ferrero wheel and a Nardi hub adapter - the two do not fit together. At the very least, the PCD is different, although the orientation of the 6 hole pattern may be the same.

[Chris J]

Because that's the pattern lancia used on the original! :D

Guy,

If you followed that logic, all Gerry's coffin spoke wheels would be 108mm pcd?!

[Swamprat33]

I must admit that I thought this was Crazy when I heard.

Wy not use an easy to get hold of adapter such as Momo pattern.
Seems daft.
Tim

[pimms]

I've got a real Ferrero wheel and a Nardi hub adapter - the two do not fit together. .

By the way, there was a Ferrero ( Sandro Munari type, two spoke ) on E-bay yesterday, for any one who's interested, 200 Euro's starting price.

Cheers

[pimms]

Here's the link,... I hope :o

http://cgi.ebay.nl/LANCIA-FULVIA-STRATOS-LENKRAD-SANDRO-MUNARI_W0QQitemZ150053279524QQihZ005QQcategoryZ780 11QQrdZ1QQcmdZViewItem

[lyndon]

the person selling the Nardi hub has another for sale,also Fiat.
will either fit Gerry,s wheel as I want to bid on the correct one, Lyndon. .

[guy mayers]

I'm sure either one would fit Lyndon. The bolt pattern at 73mm or 74mm matches the one I got for mine. if your column came from an X1.9 that's the obvious one but, as far as I know, the spline patterns on X1.9 and 124 are identical. The old X1.9 column I used to have on my car had the same hub as fitted to the 124 Spider so they should be interchangeable. I guess the difference will be in the length of the hub casting?
Hope that helps!
Guy

[lyndon]

Thank,s for that Guy, I thought it better to check with those who know.Lyndon.