PDA

View Full Version : Help and probably parts wanted


DavidM
March 2nd, 2006, 12:28 PM
I think I've wired my Beta Bosch ignition module up wrongly and broken it.All I can get is a backfire from the engine which was running fine when I took it out of the donor 4 months ago, I havent touched the timing,dizzy or carbs.Don't appear to have any spark at the plugs, there is power to the resistor on the + side of the coil and to the module.
Can some one please help with a simple test sequence to verify what is or isnt happening in the ignition set up as you can tell I am no electrical expert. If I have broken the module does any one have a spare lying about?
Thanks in advance
DavidM

Matt No VAT
March 3rd, 2006, 12:23 AM
David,

I have some beta bits in the garage from a VX I broke a while back.Do you have a p/n of the module and I'll check if I have one that matches.

cheers

Matt

DavidM
March 3rd, 2006, 12:00 PM
Matt, the part number on the front of the module is 0227100014 ,hope you've got one thanks for looking cheers David M

Sando
March 4th, 2006, 10:21 AM
Hi David
Have youy tried Betacar (http://www.betacar.co.uk/) ? They may have them or be able to help.
I remember reading in the GC book that these were also available from Unipart I think???

Cheers
Rob

guy mayers
March 4th, 2006, 11:32 AM
No Bosch but Magnetti Marelli. Is this the one? I think the one for the VX is a diffferent, smaller unit.

http://cgi.ebay.co.uk/Lancia-Beta-2-0L-digiplex-unit_W0QQitemZ8042106226QQcategoryZ31352QQrdZ1QQcm dZViewItem

Guy

DavidM
March 4th, 2006, 12:47 PM
Guy,
Thanks but wasn't the right one, but I've found the right Bosch unit on Ebay just trying to negoiate buying with the resistor and coil as a package in case I've broken these as well. Do you know the definitive wiring route to put these into the Hawk harness?,Gerry H suggested you were the expert, he didnt know. David M

guy mayers
March 4th, 2006, 03:08 PM
Sorry David! Gerry would suggest that, passing the buck. The only electronic unit I ever fitted was the VX one and I had both a VX wiring diagram and a Lancia HPE VX for comparison at the time. Needless to say I have neither now, furthermore, my memory isn't what it was, or so people tell me....
Good luck with the negotiations, hope you get what you need soon!
Cheers
Guy

Matt No VAT
March 6th, 2006, 01:07 PM
David, All I have left sadly is the VX ECU - apologies for the delay is replying