PDA

View Full Version : More Stratos rep. parts!


Chris J
December 17th, 2005, 02:34 AM
I know one or two people have bought bits and pieces from Bob Pilott recently.

Bob used to build whole Transformer/Hawk replicas at Courtenay Garage until the early 1990s.

Here's a list and some following photos of what's left:

LANCIA STRATO’S PARTS

L.H.D steering rack x2 Recon
Beta hand brake, front cable part and yoke.
Beta drive shafts
Fiat steering columns.
Fiat stalk switches.
Complete rubber seal kit. New
X19 headlamp raising motors.
Fiat 124 instruments (4/5 sets)
Fiat 124 switches (various)
Fiat 132 brake callipers. Recon
X19 radiator.
Beta gear linkage and gearlever.
Odds and ends.

I also have patterns for the interior roof trim and
Carpet set patterns

bob.pilott@btinternet.com

Chris J
December 17th, 2005, 02:37 AM
Here's the guages etc. I doubt there are any of the rarer guages as non where quoted in the list, but you never know?

Chris J
December 17th, 2005, 02:39 AM
Handbrake lever photo: I think there's only the lever to yoke part left of the cable but I'm not 100% sure?

Chris J
December 17th, 2005, 02:40 AM
Steering columns:

GMC
December 17th, 2005, 04:42 AM
hi. Chris,
Would be interested in the following, and can you please give me a prices;
L.H.D. steering rack.
Beta drive shafts (is there differebt lenghts?)
Speedo clock only in KPH
Fiat stalk switches. but need the same as I already have only

Regards,
Gerard.

Chris J
December 17th, 2005, 05:07 AM
hi. Chris,
Would be interested in the following, and can you please give me a prices;
L.H.D. steering rack.
Beta drive shafts (is there differebt lenghts?)
Speedo clock only in KPH
Fiat stalk switches. but need the same as I already have only

Regards,
Gerard.

Gerard

It isn't me that's selling. You need to get in touch with Bob Pilott (see email address given earlier in this thread). He'll let you know what's what.

armourerdoug
December 18th, 2005, 02:52 AM
I just went to meet Bob again to collect the ally inner panel set, so they are off the list guys,
Bob is a font of knowledge and a realy nice bloke, shame he doesnt still build them!!

Doug

Chris J
December 18th, 2005, 04:58 AM
Doug

I've edited the list, and taken those off.

armourerdoug
December 18th, 2005, 12:13 PM
Thanks Chris,
you may want to check with Bob, but I bought all his rubber seal kit about last June, unless he has more?

Doug