PDA

View Full Version : Alfa V6 wiring


elvis
December 29th, 2004, 01:36 PM
Ok, i've already started cutting lots of bits of my oroiginam loom. (bad mistake)

I now read as many bits on this forum as i possibly can about the looms without going dizzy.

I thinks I am going to have ask for some help. :confused:

Firstly :rolleyes: anyone got a copy of the wiring diagram.

next :D anyone want to let me have a copy

then :D i still need as much usful advise as possible on want to cut out.

The car i am fitting it in going to be front engined, RWD, with a homemade bellhousing to ford Type 9 box.

I was intend to use as much of the original loom as possible. the two looms that run to the rear for rear light and fuel pump/ senders.
The two looms that run to the front for the front lights, horn radiator gear.

I will not be using the windscreen washers / wipers (no windscreen see)
ABS loom already gone. The car never had aircon, but i believe that thee are still some bits in the other looms (ECU loom ?)

And of course the engine looms. The loom that goes to the 'Magic' box, and the loom that does the alternator stuff.

I have already cut out all the stuff that i thought would be irrelevant ( i hope) Electric seats, centre console sunroof, electric windows, central locking.

What I really ned to know IS WHAT SHOULD I KEEP

any help and / or advise will be very very welcome

chris.richard
December 29th, 2004, 05:40 PM
If you're 24v, I can help. If you're 12v I can't!

elvis
December 29th, 2004, 11:52 PM
12v i'm afraid thanks anyway :)

Marmott
January 9th, 2005, 11:16 AM
I can help you with the wiring
give me a call some time 0146+0 61916
Gary Lomas