strat parts wanted!!

[strat6v]

Hoping to start collecting bits for another strat replica.If anybody has leftovers or any panels, complete dash , mechanicals, anything really,please let me know.

John.

[chris.richard]

what suspension are you planning on using? I have Beta parts available.

[strat6v]

Hi Chris.

Its a transformer chassis, completely bareft of suspenders hubs, uprights etc. Im looking for bodywork mainly(rocking horse shit springs to mind!!!) I'll have to buy a fair bit from gerry, wishbones and links etc i'll have a crack at myself.I need dampers and springs but prefered leda's for the back. wheels are needed plus quite a lot of other little bits and bobs.If you have a minute list what you have, or perhaps i should post a list on the forum.

[CorseChris]

I had a set of wishbones (F&R) that I could barely give away a while back. Finally managed to offload them to someone....but I can't quite remember who it was! Might have been Paul or Ian Hassle...I've also got a set of 4, 5 spoke revolutions (ex Roger Donan) that kind of fall into the same category. IIRC, I was going to let Roger have them back but we never quite got anything organised and to be fair, he was only saving them from the scrap - don't think he really wanted them that badly as he'd already given them away once (pipe up if I have this wrong please Roger!). They would suit a Stradale Hawk on 4 stud hubs. Not perfect condition but certainly very usable. Even got tyres!

I've got a couple of sets of rear springs that fit standard rear struts (for the TC I think), a pair of standard rear struts (no top mounts), assorted headlamp lift motors, some headlamp nests, whole load of odds & ends really. X 1/9 panel catches, cuddly toy, tea's-made....

Might be worth you calling and having a browse if you're not too far away John. Nothing would be very expensive.

[Mark Cowling]

Hi Chris I would be interested in the 4 stud 5 spoke revolution wheels if it is O/K with Roger . Regards Mark.

[roger001]

they were 14" rims - would only suit a beta/fiat 132 set up - no good for me now with 164 front brakes

[SUSIT]

they were 14" rims - would only suit a beta/fiat 132 set up - no good for me now with 164 front brakes


Hi Guys,
I use 14 inch Revs on my Allora with 285mm discs and 4 pots (Hi Spec)
Depending on the off set I may be interested as well, Allora runs about -10

Stephen Struthers

[roger001]

I have a set of the early type rear lower wish bones - they need new bushes but if any use are free to a good home!!!

[chris.richard]

I've still got a set of custom made minilites to fit a Hawk with Fiat hubs. 15 X 6 4 stud

[CorseChris]

These 14" revolutions seem to be hard to shift....I'll be chucking them soon if nobody takes them. I don't want to get involved shipping them so first come, first served.

[Chris J]

Chris

David Jowsey who lives just 5 mins down the road from me has a 14" Revolution shod Allora. I'm sure he'd have the wheels if he knew about them.

[CorseChris]

Hi Chris,

Well, if he feels like a trip to the Worcester area he can have them...(as can anyone else).

[shaun]

I'm on my way, should be there Sat am - I'll be in contact.

[CorseChris]

We have a winner!! They are yours Shaun...

I'll PM you my phone number & address. I should be about Saturday.