PDA

View Full Version : Round things for sale

chris.richard
July 24th, 2002, 07:13 AM
4 off 6 1/2 X 15 Genuine Minilites, PCD for Lancia/Fiat hubs, with 205 X 50 Colway P-Zero pattern tyres. Both have done 2-3000 miles since new.

chris.richard@doctors.org.uk
01835 823470
chris.richard
August 8th, 2002, 05:58 AM
go on, make me an offer....
rutthenut
August 16th, 2002, 10:10 AM
Originally posted by chris.richard
go on, make me an offer....

I'm not all that likely to buy them, but do you know what the offset is for these wheels?

And a rough guideline for the sort of price you might want?

I'm assuming these are surplus to requirements if you are converting a car to Group 4 bodywork.
chris.richard
August 17th, 2002, 09:54 AM
Price negotiable, I know the wheels are about £105 each new, tyres?.
I'm changing to 5-stud hence surplus. I might keep the tyres for fronts - I've kind of given up on the group 4 arches for a number of reasons.
4.5 inches from hub surface to inner rim.
They came off a standard Beta strut/hub/stradale setup

Perhaps open at £350.
chris.richard
November 7th, 2002, 11:01 AM
somebody'll need wheels for their new Hawk kit....
chris.richard
December 16th, 2002, 06:27 AM
must go somewhere - they're in the road.
chris.richard
January 18th, 2003, 02:46 PM
bump
chris.richard
February 27th, 2003, 01:05 PM
bump again
SUSIT
February 27th, 2003, 02:05 PM
Chris
If Dave can confirm the off sets etc I require I might be Interested but be warned I dont live in the Highlands of Scotland for nothing!:)
Stratos
February 27th, 2003, 03:25 PM
Originally posted by SUSIT
Chris
If Dave can confirm the off sets etc I require I might be Interested but be warned I dont live in the Highlands of Scotland for nothing!:)

If they'd been the correct offset for an Allora, I would already have bought them by now.
SUSIT
February 27th, 2003, 10:51 PM
Sort of thought that Dave.
Sorry Chris.

Stephen Struthers.
BETANUT
February 28th, 2003, 01:34 AM
Chris,
If you haven't managed to sell them here - and assuming they'll fit a Beta (presume they will as you use Beta hubs?) then may I suggest you try putting them on www.lancisti.net or www.viva-lancia.com I've had resonable results on both.
I'd have the wheels for my VX but can't afford them just know - unless you fancy part payments.....:D
chris.richard
February 28th, 2003, 01:53 AM
They are for Lancia 4 stud hubs, but you'ld need to check the offset measurements. I know they won't fit an Integrale for that reason.
Stratos
February 28th, 2003, 01:59 AM
Offset is the reason they won't fit the Allora or the Corse.

And, just for information, Allora offsets are also different to Corse offsets.
BETANUT
February 28th, 2003, 02:42 AM
And the offset of these round things is.............?:confused:
chris.richard
March 2nd, 2003, 03:24 AM
It's in the August 17th post with the picture, Hamish
SUSIT
March 2nd, 2003, 03:36 AM
Chris.
have you read private message yet?