Alfa 12V Cams

[Mark Cowling]

Hi all I have a pair of 12V Alfa cams the lift is 9.5mm inlet and 6.0mm exhaust I do not know if these are standard or not, has anybody any idea? Regards Mark.

[roger001]

According to the 164 disk valve lifts are

Inlet 9.1mm (10.1 cloverleaf)
Exhaust 6.4mm

Hmmmmmm ........

[chris.richard]

Not a 164 then! Do you have part numbers or any other id?

[Mark Cowling]

Hi thanks for the reply the figures seem pretty close to standard and probably I was not acurate enough measuring the lift as 0.4 of a mm is approx 16 thou. Thanks again regards Mark.